iPhone 7 & iPhone 7 Plus Leak CAD Renders Show Larger Camera

0

iphone-7-cap-010

New images have appeared in the form of schemes that, once again, will show how housing iPhone 7 and iPhone 7 Plus/Pro.

The images have appeared in WeChat, but more importantly has echoed NoWhereElse (where OnLeaks writes) and we see something we had not seen in other leaks schemes: at the bottom there are two speakers and no one has been since the original iPhone. This is something the French newspaper published on June 25, but what we have today is not a physical housing, if not about schemes or renderings of the same back cover.

iphone-7-cap-03

For everything else, it is confirmed as the first renderings, it’s not that improperly, if not that Apple was testing two different models and have finally decided by the two speakers. Explained this, the lines for the antennas are in the upper and lower edges and both chambers are much larger. According to some rumors, the iPhone camera 7 shall 21mpx, while the iPhone camera 7 Plus / Pro will be 12 + 12Mpx. There is also no 3.5mm headphone port. Moreover, noticing gives me the feeling that the Touch ID is a little tucked inward, which would mean that it would touch.

iphone-7-cap-09

Not talking about the sizes, these renders also can not confirm or deny that there will be three different models, ie, a model of 4.7-inch with a normal camera, a model of 5.5-inch also with a single lens and a 5.5 inches Pro model with the already famous dual camera. Although information still appears like today, to leave any doubt we will have to wait until September.

(via: Nowhereelse.fr [Google Translate])

Follow us on Twitter, subscribe to our Facebook Page, find us on LinkedIn, circle us on Google+