Components about the iPhone 7 and cases continue to emerge from China. On this note, Digi.tech.qq.com website released images of the battery which is believed to be used in the iPhone 7 battery. The following image is 7.04W / h, which puts it very slightly above of the one used in the iPhone 6 (7.01W / h). We recall that the iPhone 6s saw his battery was reduced (6.61W / h), probably to make room for the 3D Touch screen. The voltage is not seen, so you can not know its exact capacity, but most likely be the same as the iPhone 6 (1810mAh 2915mAh for normal and for the Plus model).
According to rumors, the iPhone 7 and iPhone 7 Plus 7 (and maybe the iPhone 7 Pro) will be thinner than the iPhone 6, which makes possible the elimination 3.5mm headphone port. In the space occupied by that connector can also add new hardware, such as the Smart Connector currently using iPad Pro or letting your imagination, a system for charging the iPhone without cables.
Still about six months before the presentation of the iPhone 7, but we have seen many components assumptions device, such as the module from its dual camera, housing and even a picture where we see an iPhone without Touch ID, but the latter It is unlikely to be real, at least in 2016.
According to rumors, the iPhone 7 will be the first to not include 3.5mm port, one of the most controversial changes in recent years. Inside will be the A10 processor, which is expected to fully TSMC manufactured and which is manufactured in a 10nm process, 4GB of RAM and, according to recent rumors, there will be a 256GB model. If the last point is fulfilled, will continue as the 16GB model input?
(Source: digi.tech.qq.com [Google Translate])