Samsung S2 Galaxy Gingerbread Android 2.3.5 Update, installation and Rooter Galaxy S Guide

0

Any further &#a hundred and sixty;GRAVEL firmware 2.three.four can also be downloaded &#a hundred and sixty;for the Samsung S2 Galaxy.House owners of the Samsung Galaxy S should wait a little bit.Unless now, the brand new firmware to be had most effective in Switzerland and Nice Britain for obtain.

&#one hundred sixty; 100954_GT-I9100_ADImage

Gingerbread 2.3.4 introduces two major new features.This is the one the video telephony via Google Talk that lets you off can lead to Apple immediately FaceTime video conferencing.Secondly, the previously unknown security hole is closed.It is not the encryption of contact and calendar data can be filtered out by theoretically in open wireless networks.

Samsung S2 Galaxy Gingerbread Android 2.3.5 Update

There have been some rumors that 2.3.5 Gingerbread reach the Galaxy S2 soon, but you can already get it unofficially ! Below there are links on where  the  Android 2.3.5 ROM  for Samsung S2 Galaxy  can be found.

Features

  • Android v2.3.5 (GRJ90) from AOSP
  • Linux Kernel v2.6.35.7
  • Minimal Google apps
  • Superuser
  • Busybox

Additional Features

  • Adhoc Support for WiFi network
  • Advanced Power menu with options to restart and display options
  • Download any file
  • Enhanced auto backlight mod
  • Sync contacts from Facebook
  • Headphone icon
  • HSPA Icon
  • Improved picker Widget
  • Percentage of optional battery
  • SIP calls over 3G
  • Several other settings and features.


Samsung-android-2-3.5

Sam Firmwares has done it again!  Yes, folks, The ROM Gingerbreadofficial  Android  2.3.5for Samsung Galaxy S has been published online by SamFirmwares.com For those who do not know, Sam Firmwares have this "ability" to get official versions of unpublished samsung ROMS through methods known only to themselves .  This site also launched Android filtering Galaxy S, Samsung Spica and other  ROMs
 Android phones.

The filtered file version 2.3.5 Gingerbread Android can be downloaded and installed from SamFirmware.com  and  DarkyROM2_KI3_Base.zip [SourceForge Link

Android ROM is I9000XXJVS Gingerbread 2.3.5 and is available in stock and pre-rooteo state.The root version for now, has not lockscreens, hack camera has up actions as ringtones, Pitcher TouchWiz and MMS / SMS are maintained as shipped.

Step 1 : Download the file "update-devnull-xxx-signed.zip" to your SD card in your SGS2 from this link

 Step 2 : Start Recovery on ClockworkMod through any method you choose (Rom Manager, Power + Volume Up + Start, ADB etc …). 

 Step 3 : Make a backup of the existing facility [Flashing only first] Use the volume keys and the start button to format / data & / system. 

 Step 4 : Select "Install Zip from SD Card "(Zip Install from SD Card). 

 Step 5 : Find the file " update-devnull-xxx-signed.zip "that you downloaded earlier. 

 Step 6 : Scroll through all the NO, YES (Si). Install update-devnull-xxx-signed.zip . 

 Step 7 : Wait until the installation is complete. 

 Step 8 : Select Restart.

ROOT GALAXY S ON ANDROID XXJVS GINGERBREAD 2.3.5

 

Step 1: Download CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip !

Step 2: Unzip the file (. zip) above in a folder. You will get the file (. Tar) CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.tar – inside the folder. do not extract the file. Tar (even if you see it as a. zip).

Step 3: Download Odin3_v1.85.zip  we will use for the Rooter  Galaxy S i9000  Android XXJVS 2.3.5.

Step 4: Extract for Odin3 v1.85.zip, Odin3 v1.85.exe.

Step 5: Turn off your phone .

Step 6: Start your Galaxy S in download mode – Press and hold 3 keys on / off button + + VolumeBAShome together.

Step 7: Run Odin.exe obtained in step 4 – Odin3 v1.85.exe.

Step 8: Connect your phone to your PC now. You should get the message "Added!" Under the boxmessage to Odin in the lower left.

Step 9: On Odin, click on PDA and select the file. tar you got in step 2 - CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.tar . 

Step 10: Make sure the box  Re-partition "  is unchecked. and "Auto Reboot" and "F. Reset Time "are checked. 

Step 11: Click the START of Odin to flash the kernel CF-Root.

Step 12: After the CF-Root is installed, the Galaxy S will restart automatically. You can unplug the cable from the phone when the Galaxy S logo appears on the phone .

 

 

In addition, owners can look forward to the Galaxy S2 on the rectification of the battery bug.This was reported by some owners that their phone is in standby mode would consume too much battery powe

 We will not to be held responsible for any loss of data as a result of the malfunctioning of your Samsung Galaxy S II.

Need some help?
If you have problems in one step, or an error is displayed, you can either leave us a comment or on our  Facebook page  to reach. I try as quickly as possible to answer your questions and I will guarantee to respond to every comment.

Please support this site by visiting our Sponsors, thank you  

For more coverage on iHelplounge, Follow us on twitter , Become a Fan on Facebook to Stay updated about the new iPhoneNews, best iPhone Applications&#a hundred and sixty;,&#a hundred and sixty;iOS,&#one hundred sixty;OS X, Lend a hand.&#a hundred and sixty;

Follow us on Twitter, subscribe to our Facebook Page, find us on LinkedIn, circle us on Google+